M113 V8 Engine Accessory Drive Belt 100K Service Kit

Store > Gas Engine Products
FREE tensioner tool included. Limited offer. Do not neglect this service or you may be left stranded. This applies to most V8 (NOT M119) engines from 1998 to 2003 - SEE models below.

For E430, ML430, E500, E55. S500, CL500, and SL500 through 2003. Every M112 V8 I have worked on starts making front engine bearing noise around 90K to 100K. Almost like clockwork! This is a service you will want to perform whether you have had your Benz for a long time or just purchased one. Don't ignore this or you will end up getting strandend when your engine throws the serpentine belt. The three most neglected maintenance jobs I see on these cars (even when well maintained) are cabin air filters, front engine accessory bearings, and motor mounts.

M113 V8 Engine Accessory Drive Belt 100K Service Kit
$112.00
SKU:
GEG-M113BELTKIT

Product Details

Belt tensioner release tool in action

Replacement of these parts is so easy (especially compared to other engines) that this is definitely a job you can do yourself with minimal hand tools. I originally had planned to do a video instruction but found there are so many vidoes and information on the internet concerning this job that I decided against adding the expense and just kept the parts cost as low as possible

Here is a youtube video link to help you understand just how easy this job is: https://youtu.be/iPkRdudwK8M

Kent has developed a special tool to make installation a "snap." Now included free for a limited time.

Related Products:

$94.50

M112 V6 Engine Accessory Drive Belt 100K Service Kit

Applies to most V6 engines from 1998 to 2003 - This is a must do service! High quality Bosch Serpentine belt included.

For E320, ML320, C240, C280 and C320. Every M112 V6 I have worked on starts making front engine bearing noise around 90K to 100K. Almost like clockwork! This is a service you will want to perform whether you have had your Benz for a long time or just purchased one.

$18.90

M112 M272 V6 M113 M273 V8 Belt Tension Release and Drive Belt Install Tool Set

Works on all V6 and V8 engines from 1998 to 2013 - That's a few million engines!

Includes a long custom bent 3/8 extension, correct socket, plastic mirror, and locking pin. You add another 3/8 extension to make the job a snap. Watch the video below for a full explanation of this tool and how it works.

$22.85

M112 V6 M113 V8 Drive Belt Tensioner Pulley

1998 to 2006 engines. Sometimes the tensioner is ok but the pulley is worn or the bearing has failed. Free video instructions included

You will have to remove the drive belt to change this pulley. Once that is done replacement is easy. The free video instructions by Kent will show you how to do this as well as the proper way to remove and replace the drive serpentine belt.