Kent's Speed Adjusters for the 722.3 and 722.4 Vacuum Modulator

Now covers both old and new style Modulators. Install for rapid initial adjustment and fine road test adjustments.

PLEASE NOTE: This should be used in conjunction with our modulator pressure test kit (see below). It can be unhealthy for your transmission to just "guess by feel" where the T-pin should be turned. If you have ever tried to adjust these modulators out on the road while doing tests, you know how frustrating and difficult it can be to reach up under the car, remove the cap, and try to trun the T-pin. The later style shown below is designed so you can reach under by "feel" with your fingers and turn to adjust by small or large increments.

Kent's Speed Adjusters for the 722.3 and 722.4 Vacuum Modulator
$23.75
SKU:
TRS-7223MODSADJUSTER
Free Add-Ons Included:

Adjusting the Modulator with Kent's New Speed Adjuster - On Demand Video

Product Details

YOU MUST HAVE A PRESSURE GAUGE CONNECTED ( See our full kit below) TESTING IS DONE WITH THE VACUUM LINE DISCONNECTED and plugged. Golf Tee included for this. Only partial instructions for using these tools is included here.  Full instructions are included with out complete kit with includes the pressure gauge. 

The "speed adjusters" will help you easily adjust the tip pin on both types of modulators ( early and upgrade).

The adjuster for the early style prevents the t-pin from falling into the slots when turning it.

The adjuster for the later (upgraded) modulator will allow you to easily turn it by just reaching under the car lying on the ground. (ie road test). Watch the video here for more details.

 

Related Products: