This is not your standard cheap $20 to $30 filter. This high-performance fuel filter kit can be used with either a dual-tank or single-tank conversion from diesel fuel to straight vegetable oil (SVO) or waste cooking oil (WVO). It can even be used as a standard diesel fuel filter if you desire better filtration with an included water separator. Uses replaceable fitler elements and reside inside the filter houseing.
Product Details
This is what is included in the kit.
- Very high-quality machined aluminum filter housing with replaceable filters and clean inspection bowl w/drain.
- Three 10-micron filters are included. Easy change even on the open road.
- Brass fittings for either 5/16 or 3/8 inch fuel hose.
- 1/8 inch thick aluminum plate and strap material to build your bracket
- A complete hardware set to mount the bracket and the filter
- Video instruction on filter location, bracket drilling, and fabrication
PLEASE NOTE: No other components or SVO conversion instructions are included with this filter. This is a partial kit only. Please refer to the related products below for additional kits and instructions to complete an SVO conversion.
This is what it will look like when installed. You will need to bend and drill the aluminum straps to custom-fit the mounting bracket to your particular chassis. This one is installed in a W123 300D.
Kent is very impressed with the quality of the filter. Check out the precise internal machining.
Related Products:
SVO WVO Stanadyne Inline Fuel Heater with Extras
What you see here in new old stock. It is very hard now to find these inline heaters. I don't even think this heater is made anymore. You will need a separate power relay to drive this heater ( about 15 amp draw) and an inline fuse or circuit braker and a switch to turn it on and off.