Tired of that sagging chrome door pull on your 123 or 126? My new kit will fix this problem permanently, and the handle will be better than when it left the factory. As of August, 2026, you will need to cut the bushings to the proper lengths yourself with the razor blade include ( disregard the video instructions showing the bushings arrive pre-cut!) Instructions for cutting the bushings are included below. The detailed video instructions included are 16 minutes long, but they do NOT cover removing your door panel and getting the handle off the inside of the door.
Product Details
You will receive two long nylon bushings, which will yield six pieces once cut. You only need four, so this will give you a chance to make one or two mistakes. With a handle removed, laid the bushing up against the gap in the door, pull frame and make a light mark with a sharpie to designate the length then use the razor blade on a hard flat surface and push on the razor blade and roll the pushing at the same time so that you get a straight cut trial fit it into the cut out in the door pool frame if it's a little bit too long, you can use the sandpaper to reduce the length that explained in the full instructional video.
