This procedure is necessary when you install a new master cylinder or allow fluid to completely leak out of your master cylinder. If you do not do this, you will have small amounts of air trapped in the master cylinder making your brakes feel spongy or experiencing excessive brake pedal travel.
Product Details
Video instructions cover removing and replacing a master cylinder and how to use the fittings in the kit to prevent excessive brake fluid spillage in the engine compartment. NOTE: The short green plastic wrench is only to tighten and loosen the threaded plastic fittings. It is meant to help prevent over-tightening and ruining the threads.
The instructions will show you how to use the kit components to get every last bit of air out of the master cylinder.
Related Products:
107 114 115 116 123 Master Cylinder Brake Fluid Reservoir Grommet
This large size rubber grommet seal is a common leak area at the bottom of your brake fluid reservoir. Fits all 107 chassis, 114 and 115 chassis SEDANS ONLY, 116 chassis and 123 chassis from 1972 to 1985.
Pentosin DOT4 Brake Fluid - One Liter
WARNING: Can only ship inside the USA via UPS GROUND. If you have other items in your cart do not choose expedited shipping or US postal service! High Performance low moisture absorbing DOT brake fluid.
Complete Pressure Brake Bleeding and Flushing Kit w/ Instructions
For use on most Mercedes from 1969 to 2006 (see exceptions below)- UPS Ground Shipping ONLY! Buy the complete kit and save $$. This is almost everything you need to do a fast, clean and efficient brake fluid flush on your older Mercedes Benz passenger car.